SP2 Output Function Windows

(Check for APPX Inquiry Process! See item 13.2. Also, see items 10.10, 10.17, & 10.21.)

AAA FILENAME PCF Not On File

AAA FILENAME Revise One-Record Key Entry Frame

ASI: 13.4

Inspect Truncated Report Title

This message prints if the report title is longer than 60 characters and has been truncated by the conversion program. Since the report title is also used as the in progress message, see bugs 1.61 & 1.69.

APPX CG: In SP2, the report title can be up to 66 characters. In APPX, this can be a maximum of 60 characters.

AAA FILENAME Cross Application PCF

PROCESS NAME - Lower Level Process Created

ASI: 8.35, 10.5, 10.6, 10.29 (10.29 flagged separately in V05 after 08/27/96; 10.6 auto-totaling on lower level is also flagged separately in V05)

PROCESS NAME - Lower Level Has Subheading Frame
PROCESS NAME - Lower Level Has Subtotal Frame

ASI: 10.29 (flagged in V05 after 08/27/96)

Revise Frame/Image Position/Size

This message has been removed.

Inspect Alternate Windows With Diff. Attributes - Position, Size, & Scrolling

ASI: 1.63, 10.26 This message is printed if all alternate windows do not have the same size, position, and scrolling attributes.

Revise Begin Buffer On Start of Range

ASI: 10.20

APPX CG (is this correct?): In SP2, a subtotal window is defined to print beside a detail window. In APPX, this is handled with "buffers." It is necessary, in this case, to manually set START A BUFFER? to Y on the corresponding (i.e, same range field) RANGE-START frame. If there is no corresponding RANGE-START frame, one must be manually created that has START A BUFFER? set to Y; for output images, the image can be left blank and the COMPRESS TYPE set to omit trailing blanks so that nothing actually prints.

Inspect 'Set Alternate No.' Command Series

ASI: 8.23, 10.11, 10.18 This message prints for any window which has a Set Alternate No. command series.

Inspect 'Repeating' Window

ASI: 8.23 This message is printed for all repeating windows.

Inspect Scrolling Window

ASI: 10.31 This message prints for any window which has rows down or rows across greater than one.

Inspect Window With Location 'Beside'

ASI: 10.20 This message prints for any window with a location of 'Beside'.

Revise Alternate Number to be Less Than Or Equal to 255

APPX CG: SP2 permitted alternate window numbers to range from 1 to 999. APPX permits alternate window numbers to range from 1 to 255. Applications that use alternate window numbers from 256 to 999 must be revised.

Inspect Window With Minimum Extra Lines Greater Than Zero

ASI: 10.2